banner
Guangzhou LEDO Electronic Co.,Ltd > News > Tech Knowledge > Quality Custom LED Truck Lights Wholesale

Quality Custom LED Truck Lights Wholesale

215 Published by Ava 11 08,2018

As the expert in LED headlights, LedoAuto always meets the quality standards. We rigorously test quality without any compromises and optimum light output levels, even in the harshest weather conditions. This ensures that our long-lasting, robust products not only prevent annoying and costly standstill time but are also significantly brighter for your own safety on the road.

 

Good visibility is the most important criterion for road safety. We carry the most complete LED replacement bulbs for any cars, SUVs or trucks and wide selections of LED lighting accessories such as LED headlight lights, LED daytime running lights, LED turn signal lights and LED fog lights, etc.


In this month, we present a brand new led headlight to the market named V6 LED headlight. This is the led headlight kit customized for a truck with the advantages below:

 

 

Allow 6V – 36V working voltage

 

Most of the led headlight on the market now are designed with 24V working voltage and 28V – 30V surge voltage protection. What is surge voltage protection? That is a sudden and momentary increase in voltage. If protective measures are not employed, such a surge may bring about a failure or make the bulb burnt in the headlight housing, damaging the housing and you have to replace the whole headlamp just because a defect of headlight bulbs, that is quite big damage. When surge voltage protection is designed to be 36V. We could definitely avoid this kind of problem happen. A continued stability automotive lighting will keep your safety for long distance driving.

 

V6 is researched and developed with waterproof & shockproof level bulb body. That makes it one of the safest and most durable products on the market today.


Automotive led headlight mate CANBus cable

 

According to the electronic detection process of the automotive onboard computer, we custom made a canbus cable for our led headlight kit. This canbus cable combines the function of a resistor with a decoder, solving the problems of CANBus error on OBC board or flicker while installing led headlight bulb, and keeping itself a reasonable working temperature (below 100℃). It’s approved to work perfectly on Volvo Scania truck with our led headlights. No CANBus problem and quite safe.

 

 


We Are Specialized In LED Truck Lights!

 

A Perfect Light Pattern: Crafted around the powerful LED to provide the only LED headlight with the CORRECT beam patterns. No dark spots, no short beams, no scattered beams.

True 6500K Cool White Lighting clear daytime white lighting. Instant-On, capability with zero warm-up time

– Only Lumileds Luxeon ZES LEDs used.

Advanced LED board design syncs, double-sided PCB board with tiny board width only to simulate the filament in halogen bulbs – creating a closely matched beam style.

 

Are M3 Halogen Size Led Headlight Bulbs worth buying? (Test & Review 2019)

M3 led headlight was launched on March 2019. it is a high performance led headlight with High-speed turbo fan, the high beam led bulb is housing with 12 pcs Lumileds ZES chip and low beam led bulb has 6 pcs of Lumileds ZES chip. The maximum light output of M3 led bulb can reach 5000 lumens (a set of led headlight). Its appearance is close to the halogen bulb. M3 series bulb is housing on a 1.5mm extremely thin copper PCB board with opposing LEDs on two sides that decrease the distance between two side LEDs. With this special design, it can make the thickness of the light source close to the tungsten filament of the halogen bulb. Emitting ECE/DOT standard light beam pattern in reflector headlight housing without any dark spot. The M3 headlight equipped with a high-speed cooling system, which can make the bulb body in a stable condition with a 1300 rpm fans. It is easy to install as well, that would not influence to mount the dust cover. The bulb of M3 used 6003 Aluminium al...

Do you like ? 263

Read more

What is a good headlight beam pattern? (DOT/ECE)

Standards for Headlight Beam Patterns -- edited by Kevin   This article will discuss headlight beam patterns and the standards that agencies such as ECE/DOT require. The following points will be addressed to help gain a better understanding:   1. What does the original ECE front headlight testing graphic look like? 2. The original ECE front headlight testing graphic combine with driveway image 3. Some testing points that need to pay more attention to 4. Other standards used in other countries and areas (SAE/ADR)     How do we define a safe and effective headlight beam pattern and what are the standards it has to meet? Most people would say they want a headlight that is super bright, covers a large area in front of the vehicle and has uniform illumination with no dark spots. But can this be achieved and still meet the standards set forth by ECE (E-mark) or SAE (DOT)?   The short answer is, YES! The keys to optimal performance are to be sure the light is focu...

Do you like ? 1,099

Read more

2018 M2 Compact & Ultra Bright LED Headlights Review Guide

This is our new M2 LED Headlight series launched on November 2018. Its single beam housing with 2 pics CR CSP led chip while the dual beam housing with 4 pics leds, M2 led headlight kit can reach 6000 Lumen output. With an advanced dynamic design, high counterclockwise and low vibration of the fan, the M2 LED Headlight to work out the issue of noise in a safe situation.   The bulb of M2 used 6003 Aluminum alloy, and bulb body is integrated by the hot-pressing process for better heat dissipation. And it is using double layer copper PCB which provides a good heat dissipation. Because of the high adhesion between the double layer copper PCB, it is beneficial to the heat dissipation and extends the lifespan of LEDs, the LED chips would not burn out easily.     All in one style, the length of the bulb body is 77mm, the width of the heat sink is 31mm. The compact bulb body is close to the halogen bulb size LED Bulb Operating Temperature Testing Testing the led bulb with 1...

Do you like ? 418

Read more

Are F2 LED Headlights Worth buying? (Test & Review 2018)

F2 led headlight was launched on September 2017. it is a high performance led headlight with fan, the double beam led bulb are designed with 4 CR CSP led chips while single beam led bulb has 2 pcs of CR CSP LEDs. The maximum light output of F2 led bulb can reach 6000 lumens.   The F2 bulb is housing one PCB board in middle with opposing LEDs on two sides that decrease the distance between two side LEDs. With this special design, it can make the thickness of light source close to the tungsten filament of the halogen bulb.   The F2 headlight using a small size fan is easy to install which would not influence to mount the dust cover. The bulb of F2 used 6003 Aluminium alloy with a decent surface treatment that creates a good texture for the bulb. Its operating power can up to 36W which will have a better canbus performance than the common 25W led headlight.     Next, we test the F2 led headlight performance, the reviews are shown as below:   LED Bulb Operating...

Do you like ? 867

Read more

Blade Led Headlight Test Report

This is Blade led headlight which was launched on May 2018. Its double beam led bulb was designed with 24 pcs of SEOUL CSP-Y19 LED CHIPS, while the single beam led bulb was designed with 12 pcs of SEOUL CSP-Y19 LED CHIPS. Take the H11 led bulb single beam as an example, its length is 87.3mm, the width of its heat sink is 32mm. For the bulb body part, the length is 41.9mm and the width is 12.mm.     Besides, the distance between opposing LEDs is 2.54mm, almost equivalent to the filament width of factory halogen bulb, which is 2mm. Generally, its volume is relatively compact compared to others fanless led headlights.     The heat sink of Blade led headlight using 6003 Aluminum alloy, heat sink and bulb body are integrated by the hot pressing process for better heat dissipation, which can’t be disassembled.   LED Bulb Operating Temperature Testing :   Testing the led bulb with 13.5-volt power supplied for 30 minutes and the room temperature is about 25 d...

Do you like ? 521

Read more

Fiberglass PCB vs. Aluminum PCB vs. Copper base PCB vs. Ceramic PCB

For the PCB boards now in application to LED headlight, there are mainly four kind of materials, Fiberglass(FR4) PCB, Aluminum PCB, Copper PCB and Ceramic PCB. It is a good deal to understand the distinctions for these four types PCB. Which PCB you choose depends on the circuit design construction of the headlight. FR4 vs. Aluminum PCB   Price Comparison In the cost comparison, the Aluminum PCB is more expensive than FR4, as well as more superior in performance.   Thermally conductivity Aluminum PCB has a great capability of thermal conductivity than FR4 which makes them play an important role in LED lighting technology.   Technology practices The thermal conductivity dielectric material of Aluminum PCB is a thermal bridge that connects the components and metal plate. It can transfer heat to the heat sink through the core automatically. An Aluminum backed PCB is assembled with aluminum backing, highly thermally conductive dielectric layer and the standard circuit lay...

Do you like ? 416

Read more

4 Simple Methods to Select the Best LED Headlight Bulbs

In this post, we will introduce to you the methods to select the best led headlight bulbs with fan or without fan from the engineer view, by analyzing what is important to a led headlight bulb, telling the methods to test the led headlight and get a conclusion from the data. And also mentioned what other factors are related to the quality of led headlight bulbs. After reading our post and follow our steps, you will be able to easily judge a led headlight is good or bad.   The Structure of this Article - 4 Simple Methods to Select the Best LED Headlight Bulbs   Three Type of Led Headlight Heat Sink - Aluminum heat sink, fan for heat sink and copper braid heat sink, what are the different among them? The pros and cons? What Should We Concern on When Picking Fanless Led Headlight Bulbs? - Led Chips, bulb size, or Lumen output? All these info are told by the seller, but what should we concern on when picking fanless led headlight bulb? How to Choose the Best Fanless Led Headli...

Do you like ? 715

Read more

Genuine G7 PK Fake G7 – How to Reduce Product Cost?

I think many people will meet this situation while shopping two similar products but with a great difference on prices.it is hard to make a choice for you, because you want to purchase the cheaper one but also worry about its quality as well. It is saying that you get what you pay. This is the best description of the current electronic products industry condition in China. Even high-value product like the laptop, or a cheap product like power bank or led light, we can find many similar products from different manufacturers. How can we identify which one is good and which one is in bad quality? We should take the product shell apart to see what kind of electronic component they used inside. In this way, we can understand the reasons why the suppliers always say that the price they offered is the best price and couldn’t be low, while another supplier can casually offer you a price cheaper 5USD, or 10USD. On our last post: How to Identify Genuine PHILIPS G7 or Fake PHILIPS G7 LED Headl...

Do you like ? 239

Read more