banner
Guangzhou LEDO Electronic Co.,Ltd > News > Tech Knowledge > Genuine G7 PK Fake G7 – How to Reduce Product Cost?

Genuine G7 PK Fake G7 – How to Reduce Product Cost?

180 Published by Ava 09 30,2018

I think many people will meet this situation while shopping two similar products but with a great difference on prices.it is hard to make a choice for you, because you want to purchase the cheaper one but also worry about its quality as well.

It is saying that you get what you pay. This is the best description of the current electronic products industry condition in China. Even high-value product like the laptop, or a cheap product like power bank or led light, we can find many similar products from different manufacturers. How can we identify which one is good and which one is in bad quality? We should take the product shell apart to see what kind of electronic component they used inside. In this way, we can understand the reasons why the suppliers always say that the price they offered is the best price and couldn’t be low, while another supplier can casually offer you a price cheaper 5USD, or 10USD.

On our last post: How to Identify Genuine PHILIPS G7 or Fake PHILIPS G7 LED Headlight Conversion Kit? We teach you how to identify our G7 Philips led headlight and fake G7 led headlight. After reading the article, some clients also ask us a question, these are just some small difference on appearance and craft, we don’t mind so much, could you tell us what is the biggest difference between your G7 and copied G7 on the market? Or in other words, why are their copied G7 cheaper than yours? Do you really make a great profit from it?

On this post we’d like to explain to you, what are the difference between the genuine product and copied product, the high price product and cheap price product.

Firstly, We take apart the copied G7 headlight, analyzing its core component and driver, the separate part is shown below:

Philips G7 led headlight
This is the circuit board of driver, which is also the control center of led headlight kit.

The MOS, inductance, diode and capacity are the most expensive electronic components on the circuit board. After comparing the two circuit board, we can notice that their inductance, diode and capacity are in a great difference.

- Different level inductance
On Genuine G7, our inductance is using integrated inductance while the inductance on copied G7 is using winding inductance.
- The diode
There is a double quantity of our diode which is in 2A current with precision welding. Although we don’t know their diode specification, we can see a terrible welding from the picture. If one of the diodes is disconnected, no one can expect what will happen of the hell.
- The capacity
From the picture, you would find that the genuine one is in a professional and precise design, compared to the fake one, it is in a rough handcraft.

We can save money from each electronic component to reduce the product cost at least 5 USD. Many clients always ask us whether we can make G7 be cheaper or not? Yes, of course. If you need a lower price, we can use recycle the MOS, inductance, diode and capacity. The product cost could be saved at least 12 USD. But if we do that, is it really a good quality product for you that you want to use in your vehicle? Is it beneficial for both you and us? I think all of you will have an answer for yourself.

What is a good headlight beam pattern? (DOT/ECE)

Standards for Headlight Beam Patterns -- edited by Kevin   This article will discuss headlight beam patterns and the standards that agencies such as ECE/DOT require. The following points will be addressed to help gain a better understanding:   1. What does the original ECE front headlight testing graphic look like? 2. The original ECE front headlight testing graphic combine with driveway image 3. Some testing points that need to pay more attention to 4. Other standards used in other countries and areas (SAE/ADR)     How do we define a safe and effective headlight beam pattern and what are the standards it has to meet? Most people would say they want a headlight that is super bright, covers a large area in front of the vehicle and has uniform illumination with no dark spots. But can this be achieved and still meet the standards set forth by ECE (E-mark) or SAE (DOT)?   The short answer is, YES! The keys to optimal performance are to be sure the light is focu...

Do you like ? 742

Read more

2018 M2 Compact & Ultra Bright LED Headlights Review Guide

This is our new M2 LED Headlight series launched on November 2018. Its single beam housing with 2 pics CR CSP led chip while the dual beam housing with 4 pics leds, M2 led headlight kit can reach 6000 Lumen output. With an advanced dynamic design, high counterclockwise and low vibration of the fan, the M2 LED Headlight to work out the issue of noise in a safe situation.   The bulb of M2 used 6003 Aluminum alloy, and bulb body is integrated by the hot-pressing process for better heat dissipation. And it is using double layer copper PCB which provides a good heat dissipation. Because of the high adhesion between the double layer copper PCB, it is beneficial to the heat dissipation and extends the lifespan of LEDs, the LED chips would not burn out easily.     All in one style, the length of the bulb body is 77mm, the width of the heat sink is 31mm. The compact bulb body is close to the halogen bulb size LED Bulb Operating Temperature Testing Testing the led bulb with 1...

Do you like ? 301

Read more

Are F2 LED Headlights Worth buying? (Test & Review 2018)

F2 led headlight was launched on September 2017. it is a high performance led headlight with fan, the double beam led bulb are designed with 4 CR CSP led chips while single beam led bulb has 2 pcs of CR CSP LEDs. The maximum light output of F2 led bulb can reach 6000 lumens.   The F2 bulb is housing one PCB board in middle with opposing LEDs on two sides that decrease the distance between two side LEDs. With this special design, it can make the thickness of light source close to the tungsten filament of the halogen bulb.   The F2 headlight using a small size fan is easy to install which would not influence to mount the dust cover. The bulb of F2 used 6003 Aluminium alloy with a decent surface treatment that creates a good texture for the bulb. Its operating power can up to 36W which will have a better canbus performance than the common 25W led headlight.     Next, we test the F2 led headlight performance, the reviews are shown as below:   LED Bulb Operating...

Do you like ? 641

Read more

Blade Led Headlight Test Report

This is Blade led headlight which was launched on May 2018. Its double beam led bulb was designed with 24 pcs of SEOUL CSP-Y19 LED CHIPS, while the single beam led bulb was designed with 12 pcs of SEOUL CSP-Y19 LED CHIPS. Take the H11 led bulb single beam as an example, its length is 87.3mm, the width of its heat sink is 32mm. For the bulb body part, the length is 41.9mm and the width is 12.mm.     Besides, the distance between opposing LEDs is 2.54mm, almost equivalent to the filament width of factory halogen bulb, which is 2mm. Generally, its volume is relatively compact compared to others fanless led headlights.     The heat sink of Blade led headlight using 6003 Aluminum alloy, heat sink and bulb body are integrated by the hot pressing process for better heat dissipation, which can’t be disassembled.   LED Bulb Operating Temperature Testing :   Testing the led bulb with 13.5-volt power supplied for 30 minutes and the room temperature is about 25 d...

Do you like ? 407

Read more

Fiberglass PCB vs. Aluminum PCB vs. Copper base PCB vs. Ceramic PCB

For the PCB boards now in application to LED headlight, there are mainly four kind of materials, Fiberglass(FR4) PCB, Aluminum PCB, Copper PCB and Ceramic PCB. It is a good deal to understand the distinctions for these four types PCB. Which PCB you choose depends on the circuit design construction of the headlight. FR4 vs. Aluminum PCB   Price Comparison In the cost comparison, the Aluminum PCB is more expensive than FR4, as well as more superior in performance.   Thermally conductivity Aluminum PCB has a great capability of thermal conductivity than FR4 which makes them play an important role in LED lighting technology.   Technology practices The thermal conductivity dielectric material of Aluminum PCB is a thermal bridge that connects the components and metal plate. It can transfer heat to the heat sink through the core automatically. An Aluminum backed PCB is assembled with aluminum backing, highly thermally conductive dielectric layer and the standard circuit lay...

Do you like ? 321

Read more

4 Simple Methods to Select the Best LED Headlight Bulbs

In this post, we will introduce to you the methods to select the best led headlight bulbs with fan or without fan from the engineer view, by analyzing what is important to a led headlight bulb, telling the methods to test the led headlight and get a conclusion from the data. And also mentioned what other factors are related to the quality of led headlight bulbs. After reading our post and follow our steps, you will be able to easily judge a led headlight is good or bad.   The Structure of this Article - 4 Simple Methods to Select the Best LED Headlight Bulbs   Three Type of Led Headlight Heat Sink - Aluminum heat sink, fan for heat sink and copper braid heat sink, what are the different among them? The pros and cons? What Should We Concern on When Picking Fanless Led Headlight Bulbs? - Led Chips, bulb size, or Lumen output? All these info are told by the seller, but what should we concern on when picking fanless led headlight bulb? How to Choose the Best Fanless Led Headli...

Do you like ? 588

Read more

Genuine G7 PK Fake G7 – How to Reduce Product Cost?

I think many people will meet this situation while shopping two similar products but with a great difference on prices.it is hard to make a choice for you, because you want to purchase the cheaper one but also worry about its quality as well. It is saying that you get what you pay. This is the best description of the current electronic products industry condition in China. Even high-value product like the laptop, or a cheap product like power bank or led light, we can find many similar products from different manufacturers. How can we identify which one is good and which one is in bad quality? We should take the product shell apart to see what kind of electronic component they used inside. In this way, we can understand the reasons why the suppliers always say that the price they offered is the best price and couldn’t be low, while another supplier can casually offer you a price cheaper 5USD, or 10USD. On our last post: How to Identify Genuine PHILIPS G7 or Fake PHILIPS G7 LED Headl...

Do you like ? 180

Read more

How to Identify Genuine PHILIPS G7 or Fake PHILIPS G7 LED Headlight Conversion Kit?

Dear Our Esteem Clients, Recently we found that there is a counterfeit G7 PHILIPS LED headlight sold in the market. Whatever on appearance or packaging, they just totally copy our G7 LED headlight without any creation. We can not allow this happened and have requested our lawyer to suit this company. In order to avoid the situation that our esteem clients buy the fake products and cause any loss. We write this article to teach you how to identify a genuine G7 led headlight and the fake one. There are many detail difference between these two headlight bulbs: - Different Gloss - ACL mark - Craft and Detail - Cutting Curvature - Surface Craft - Thickness of Chuck - Solid metal and hollow metal on the connector - The width of the hanger - The surface craft of driver - LEDO G7 has scale mark - Counterfeit one has obviously cut burr - G7 Ledo use high hardness plug same to PHILIPS X-treme Ultinon led headlight - Different plug shape The craft details and electric component ar...

Do you like ? 274

Read more