banner

On this page, we will post the latest technical news and share with you the tech knowledge about automotive led lighting.

Published by Ava04 16,2019

How to Choose a Projector Headlight Bulb for Your Vehicle?

In this article, we will discuss how to choose an appropriate LED headlight bulb for the projector in low beam. The following points will be helpful for a better understanding:   1.The structure introduction of the xenon projector 2.The Refraction of Light inside the xenon projector 3.Test for different types of LED bulb   How do we define an appropriate projector LED headlight bulb? That means how do we choose a led headlight bulb for a xenon projector in a proper way. Most people prefer bright and uniform light with a plat beam pattern emits from a xenon projector.   Even some people have brought very bright led headlight bulb in the aftermarket for their projector, but they feeling not that bright while driving after they installed it, because the light output did not perform well or emit enough brightness for driving for some reasons. So what’s wrong with that result caused?     Disassemble of the xenon projector structure   Before explaining that ...

Do you like ? 721

Read more

Published by Ava04 04,2019

Are M3 Halogen Size Led Headlight Bulbs worth buying? (Test & Review 2019)

M3 led headlight was launched on March 2019. it is a high performance led headlight with High-speed turbo fan, the high beam led bulb is housing with 12 pcs Lumileds ZES chip and low beam led bulb has 6 pcs of Lumileds ZES chip. The maximum light output of M3 led bulb can reach 5000 lumens (a set of led headlight). Its appearance is close to the halogen bulb. M3 series bulb is housing on a 1.5mm extremely thin copper PCB board with opposing LEDs on two sides that decrease the distance between two side LEDs. With this special design, it can make the thickness of the light source close to the tungsten filament of the halogen bulb. Emitting ECE/DOT standard light beam pattern in reflector headlight housing without any dark spot. The M3 headlight equipped with a high-speed cooling system, which can make the bulb body in a stable condition with a 1300 rpm fans. It is easy to install as well, that would not influence to mount the dust cover. The bulb of M3 used 6003 Aluminium al...

Do you like ? 593

Read more

Published by Ava01 24,2019

What is a good headlight beam pattern? (DOT/ECE)

Standards for Headlight Beam Patterns — edited by Kevin   This article will discuss headlight beam patterns and the standards that agencies such as ECE/DOT require. The following points will be addressed to help gain a better understanding:   1. What does the original ECE front headlight testing graphic look like? 2. The original ECE front headlight testing graphic combine with driveway image 3. Some testing points that need to pay more attention to 4. Other standards used in other countries and areas (SAE/ADR)     How do we define a safe and effective headlight beam pattern and what are the standards it has to meet? Most people would say they want a headlight that is super bright, covers a large area in front of the vehicle and has uniform illumination with no dark spots. But can this be achieved and still meet the standards set forth by ECE (E-mark) or SAE (DOT)?   The short answer is, YES! The keys to optimal performance are to be sure the light is...

Do you like ? 1,745

Read more

Published by Ava12 13,2018

2018 M2 Compact & Ultra Bright LED Headlights Review Guide

This is our new M2 LED Headlight series launched on November 2018. Its single beam housing with 2 pics CR CSP led chip while the dual beam housing with 4 pics leds, M2 led headlight kit can reach 6000 Lumen output. With an advanced dynamic design, high counterclockwise and low vibration of the fan, the M2 LED Headlight to work out the issue of noise in a safe situation.   The bulb of M2 used 6003 Aluminum alloy, and bulb body is integrated by the hot-pressing process for better heat dissipation. And it is using double layer copper PCB which provides a good heat dissipation. Because of the high adhesion between the double layer copper PCB, it is beneficial to the heat dissipation and extends the lifespan of LEDs, the LED chips would not burn out easily.     All in one style, the length of the bulb body is 77mm, the width of the heat sink is 31mm. The compact bulb body is close to the halogen bulb size LED Bulb Operating Temperature Testing Testing the led bulb with 1...

Do you like ? 628

Read more

Published by Ava11 29,2018

SUZUKI Swift Install with LED Backup Light Solution

Suzuki Swift has a wider front and rear track and with more standard features in return for driving. Some guys prefer to upgrade reserve light into LEDs with their Suzuki Swift. It is a matter of personal preference. One thing for sure is that LEDs are much brighter than factory light, even the rear lights. You will not worried about cars and how the reverse lights “blink-on” in a moment when shifting into drive from park. This series LEDs designed with a built-in resistor and fit the OBC system that you can easily plug and play this bulb with your screwdriver.     This Suzuki Swift has upgraded a series of LED reserve lights of W16W led bulb. It is with bright and white light penetration. Backup light is an important part of the automobile rear light; all vehicles are wanted to possess them. If cars do not have sufficient backup lights in the evening, another car behind it might not exactly see the reserving vehicle. It might cause an automobile rear-end coll...

Do you like ? 399

Read more

Published by Ava11 28,2018

BMW 3-Series LED License Light Upgrade Guide

BMW 3-Series is large, spacious, safe, smart, and more enjoyable to drive. Some retrofiters wanted to give their car an updated look in the rear. So they would upgrade their license light to the led bulb in an easy way in less than 5 minutes. It just needs a flat tip screwdriver to press in the clips that hold the light in. Then just swap the lights in, and there plug and play the led bulb. The license light is not so bright that make the person behind you crash.     This BMW 3 series has installed a pair of C5W Led Canbus license plate lights and the white output is super bright and very satisfying! The obvious white license light can attract the people’s attention and make your vehicles out of the crowd. That can be easily noticed for the drivers behind you and provide a safe distance both of you for driving. This 3 Series LED license light is not polar sensitive with a built-in canbus design for plug and play, so you only have to insert the LED bulb into the light hous...

Do you like ? 259

Read more

Published by Ava11 21,2018

The Guide to Upgrade Lexus IS350 Reverse Light

Just installed a pair of 4700K ultra bright LEDs for reverse lights on my client’s 2015 Lexus IS350. This photo will tell you how nice the looking is.   It’s really simple to reach the back-up or reverse lights. Open up the trunk. On the exterior of the taillight there are 2 small plastic tabs that cover a 10mm screw. The trunk lid covers them up, make sure that’s why you have to open the trunk. Remove both 10mm screws as well as give the entire taillight a lip tug towards you. It will pop loosened and come out. Be careful not to damage your bumper. Change the light bulb into the w16w LED canbus bulbs then push the housing back into the vehicle. Put the 2 10mm screws back in and cover, placed the two small covers back, and then you’re done.   Don’t need to concern the lamp out warning. These led bulbs work well fitting in Lexus original OBC control system. And one thing is for certain – these led light bulbs are developed for road safety. It has an advanc...

Do you like ? 158

Read more

Published by Ava11 20,2018

Honda Odyssey Ungrade LED Turn Signal Light

The fifth generation of the Honda Odyssey still holds the title of the most popular minivan in America for eight straight years and wants to continue doing so for the 2019MY. It is a great minivan very spacious inside and has a great look on the outside. Some guys want to make their Honda Odyssey personal and changing car lights to LEDs is the easiest way for you to make you have a bright look and being outstanding from the rest.   This Honda Odyssey show as below was retrofitted with BA15S CANBUS LED. The amber led bulb has the same color temperature as the halogen bulb. Its light output is 200% brighter than the halogen bulb. The built-in canbus function can help the led bulb and the OBC fit quietly well. Upgrading to led turn signal light would make a great change for your Odyssey that has driven for many years. At the meantime, LED as a fast start light source, it would be easier to get the pedestrians and driver’s attention whatever driving at daytime or nighttime on road,...

Do you like ? 264

Read more

Published by Ava11 13,2018

The Guide to Upgrade SKODA KODIAQ Reverse Light

SKODA KODIAQ models in the Chinese market are housing with single reserve light, while KAROQ, Octavia, Superb are designed with double reserve light. Single reserve light is enough for the hatchback vehicle but does not fit the wide vehicle body of SUV design. It is not bright enough as a warning signal and the rear lighting.   The rear light of SKODA KODIAQ in Europe market is assembled by Valeo. It consists of reserve light and fog light, which can be brought from the shopping web and can be installed into the vehicle directly but with a little expensive. This type of rear light can save lots of time for whom do not want to make the manual retrofit.     The second method for replacement is to use led reserve light, but it needs to open the rear light housing and drill a hold on the reflector bowl to fix the led bulb. The rear light is sealed by cold glue which needs to bake in the oven in order to open the assembly. Then put the w16w canbus LED bulb in the housing,...

Do you like ? 608

Read more

Published by Ava11 08,2018

Quality Custom LED Truck Lights Wholesale

As the expert in LED headlights, LedoAuto always meets the quality standards. We rigorously test quality without any compromises and optimum light output levels, even in the harshest weather conditions. This ensures that our long-lasting, robust products not only prevent annoying and costly standstill time but are also significantly brighter for your own safety on the road.   Good visibility is the most important criterion for road safety. We carry the most complete LED replacement bulbs for any cars, SUVs or trucks and wide selections of LED lighting accessories such as LED headlight lights, LED daytime running lights, LED turn signal lights and LED fog lights, etc. In this month, we present a brand new led headlight to the market named V6 LED headlight. This is the led headlight kit customized for a truck with the advantages below:     Allow 6V – 36V working voltage   Most of the led headlight on the market now are designed with 24V working voltage and 28V –...

Do you like ? 299

Read more

Published by Ava10 31,2018

Volkswagen Passat B7 Upgrade with P21W Canbus Led Turn Signal Light

Volkswagen Passat B7 have OEM Valeo headlights with the beautiful beam pattern that offers a long distance lighting vision at night driving. At the same time, DRL, rear lights/brake light has nice performance and quality as well. However, the brightness of the turn signal light is not enough. The turn signal light of B7L should be designed to be LED strip light, but Passat B7 still housing with factory halogen bulb.   We use turning light frequently when driving a car. If the turning light using with a LED bulb which is made in high brightness, stable and fast start light source, it would be easier to get the pedestrians and driver’s attention whatever driving at daytime or nighttime on road. Especially, in highway or in the rainy and foggy day, we usually use turning light when changing the lane or use the light in double flicker when we intend to reduce the driving speed. Many LED turn signal lights are eye-catching and fast on/off which is beneficial to get the rear cars’ at...

Do you like ? 395

Read more

Published by Ava10 26,2018

Are F2 LED Headlights Worth buying? (Test & Review 2018)

F2 led headlight was launched on September 2017. it is a high performance led headlight with fan, the double beam led bulb are designed with 4 CR CSP led chips while single beam led bulb has 2 pcs of CR CSP LEDs. The maximum light output of F2 led bulb can reach 6000 lumens.   The F2 bulb is housing one PCB board in middle with opposing LEDs on two sides that decrease the distance between two side LEDs. With this special design, it can make the thickness of light source close to the tungsten filament of the halogen bulb.   The F2 headlight using a small size fan is easy to install which would not influence to mount the dust cover. The bulb of F2 used 6003 Aluminium alloy with a decent surface treatment that creates a good texture for the bulb. Its operating power can up to 36W which will have a better canbus performance than the common 25W led headlight.     Next, we test the F2 led headlight performance, the reviews are shown as below:   LED Bulb Operating...

Do you like ? 1,428

Read more
12 Next > >> Page 1 / 2